What Should I do if my Tapo Floodlight Camera Will Not Power on?

Tapo Others
Updated 04-23-2024 00:29:38 AM FAQ view icon8577
This Article Applies to: 

Disclaimer: Please consult with, or have these steps diagnosed and performed by a licensed electrician.

  1. Make sure you have turned on the circuit breaker.
  2. Check that the bracket and camera are firmly attached.

  1. Turn off the circuit breaker and check the wiring. Make sure the Line and Neutral wires are connected correctly. Refer to https://www.tp-link.com/support/faq/3474/ for detailed instructions.

  1. Turn off the circuit breaker and check that the wires are well-connected to the bracket and the screws are tightened.

  1. Reset the circuit breaker and verify the wires are working properly. Make sure the power supply voltage is 110 V~240 V. It’s recommended to consult with, or have this step performed by a licensed electrician.

 

Is this faq useful?

Your feedback helps improve this site.

Recommend Products

Community

TP-Link Community

Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.

Visit the Community >