Tapo or Kasa Devices Showing Offline After Changing or Resetting the Router
*Note: All Tapo/Kasa devices require and only work with the Tapo/Kasa Apps
If you have a Kasa Smart device that reports a status of “Offline” after making changes to your network settings, changing your ISP or router, or resetting your router, please try the troubleshooting steps below.
Note: Currently, there is no specific setting in the Tapo or Kasa app that accommodates switching the smart device(s) from one network to another; however, you can still achieve this using the following two methods instead.
Step 1. Apply the same wireless settings (including the wireless network name, wireless encryption, and password) on your new router, just as it was configured on the old one. Then, the device(s) should be able to connect to the new router automatically.
Step 2. If you are unable to change the router’s wireless settings, you can also reset and reconfigure the smart device with the new Wi-Fi network.
Please refer to the Quick Installation Guide for steps on how to reset your smart device. (Both soft reset and hard reset can be used in this case.)
For assistance with smart device reconfiguration, please see the available resources below.
For Tapo:
For Smart Cameras: How to set up the Tapo camera | TP-Link
For Smart Bulbs: How to set up Tapo smart bulb | TP-Link
For Smart Plugs: How to set up Tapo smart plug | TP-Link
For Smart Hubs: How to Set Up Your Tapo Smart Hub and Connect Hub to Your Router Wirelessly (Tapo H200) | TP-Link
For Kasa:
For Smart Cameras: How Do I Setup my Kasa Cam? | TP-Link
For Smart Plugs: How to set up my TP-Link Smart Plug Switch via Kasa
If you need further assistance, please contact TP-Link Customer Support here.
Is this faq useful?
Your feedback helps improve this site.
TP-Link Community
Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.