How to Configure Router Mode on TL-WR702N

User Application Requirement
Updated 05-25-2016 03:03:31 AM FAQ view icon300049
This Article Applies to: 

Note: This FAQ is only suitable for TL-WR702N with firmware version 130314 or older; it is NOT suitable for 130528 or later version.

Definition:The TL-WR702N is connected to a DSL or cable modem and works as a regular wireless router. 

Application:Internet access from DSL or cable modem is available for one user but more users need to share the Internet.
 
Physical Connection
 
Step 1:
Connect the WR702N directly to your computer’s Ethernet port by an Ethernet cable;
 
Step 2:
Power on the WR702N
Initial Computer Setup– For Windows 7, Vista & XP (For Mac OS X, please go to page3)
Step 1:
Windows 7&Windows Vista: Go to Start->Control Panel ->Network and Sharing Center
Windows XP: Go to Start->Control Panel->Network Connections
 
Step 2:
Windows 7: Go to Network andSharing Center->Change Adapter settings
Windows Vista: Go to Network andSharing Center->Manage Network Connections
Windows XP: (Go to Next Step)
 
Step 3:
Windows 7, Vista and XP: Right Click Local Area Connection >Select Properties -> Double Click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol (TCP/IP) forWindows XP.
 
Step 4:
Windows 7, Vista and XP: Select “Use the Following IP address:
Type the following information:
1.     IP address: 192.168.0.10
2.     Subnet mask: 255.255.255.0
Click OK to exit
Click OK again to apply the settings.
Windows 7, Vista & XP
 
Initial Computer Setup– For Mac OS X
Go to the Apple>System Preferences->Network-> Highlight Ethernet ->Configure IPv4: Using DHCP with manual address
Input the IPv4 Address: 192.168.0.10
Click Apply
 
Access the Management Page
 
Open a Web Browser -> Type 192.168.0.254 in the address bar -> Press Enter
 
Enter the default User Name: admin
Enter the default Password: admin
Click OK
 
Run Quick Setup
 
Step 1:
Go to Quick Setup-> Click Next
 
Step 2:
Select Router-> Click Next
 
Step 3:
Customize your wireless name (SSID) and password
 
Wireless Radio: Enable
SSID: (Rename Your Wireless Name)
Region:(Select Your Current Location)
Channel: Auto
Mode: 11bgn mixed
Channel Width: Auto
Security Options: WPA-PSK/WPA2-PSK
PSK Password: (Create a Private Password)
 
Click Next
 

 

Step 4:
Choose the WAN Connection your ISP is using. For most DSL and cable ISP, they use Dynamic IP.
If you’re not sure, please consult with your ISP customer service.
 
Procedures are different according to the Connection Type you choose.
1) Select Dynamic IP, and click Next;
2) Select PPPoE, input the Username and Password provided by ISP and then click Next;
 
3) Select Static IP, input the IP parameters provided by ISP and then click Next;
 
Step 5:
Click: Reboot, and wait until it goes to 100%
 
At the same time please reboot your modem.
 
Relocate the WR702N
You may now connect the WR702N directly into the LAN Ethernet port on the back of your Modem.
Congratulations! Youcan share your internet to multiple wireless devices.
 
Final Computer Reversion– For Windows 7, Vista & XP (For Mac OS X, please go to page 9)
 
Step 1:
Windows 7&Windows Vista: Go to Start->Control Panel ->Network and Sharing Center
Windows XP: Go to Start->Control Panel->Network Connections
 
Step 2:
Windows 7: Go to Network and Sharing Center->Change Adapter settings
Windows Vista: Go to Network and Sharing Center->Manage Network Connections
Windows XP: (Go to Next Step)
 
Step 3:
Windows 7, Vista and XP: Right Click Local Area Connection ->Select Properties -> Double Click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol (TCP/IP) forWindows XP.
 
Step 4:
Windows 7, Vista and XP: Select “Obtainan IP address automatically” and “Obtain DNS server address automatically
Click OK to exit
Click OK again to apply the settings.
Windows 7, Vista & XP
 
Final Computer Reversion – For Mac OS X
 
Go to the Apple->System Preferences->Network-> Highlight Ethernet ->Configure IPv4: Using DHCP
Click Apply
If it doesn't work, please feel free to contact us(support@tp-link.com).
 
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Is this faq useful?

Your feedback helps improve this site.

Community

TP-Link Community

Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.

Visit the Community >